Skip to content

DCT USB Format Tool

The DCT has a USB format tool that can be used to re-format and partition a USB drive. This will help make a drive compatible with all parts of the EMIT system.

Warning: Formatting a drive will erase all files previously on the drive

To use the tool, perform the following steps:
  1. Enter the Setup or Engineering password under the 'Access' Menu
  2. Navigate to 'Settings' -> 'System / Global Settings' -> 'Format USB Drive'
  3. Put a USB drive in the back of the touchscreen
  4. Select 'Start Format'
  5. When complete, remove USB drive
After formatting, the USB will be blank and can be used for downloading datalogs, configurations, uploading software updates, etc.

Feedback and Knowledge Base