Knowledge Base

← Welcome to the EMIT Technical Forum!

  1. Controls →

    1. Software Update - Controls
    2. ETS C1D2 Information
    3. EMD Compliance Log
    4. ETS Wiring Diagrams

  2. Controls — AFRC →

    1. AFRC Overview
    2. AFRC Installation Guide
    3. AFRC Home Screen
    4. AFRC Setup
    5. AFRC Controlling the Engine

  3. Controls — Brain (Annunciator) →

    1. Annunciator Overview
    2. Annunicator Installation Guide
    3. Annunciator Main User Interface Overview
    4. Annunciator Fault/Output Status Screen
    5. Annunciator Basic Setup and Configuration Overview

  4. Controls — EIM →

    1. EIM Overview
    2. EIM Timers
    3. EIM Alarms Overview
    4. EIM Engine Info Page
    5. EIM Modbus RTU

  5. Controls — Ignition →

    1. Ignition Overview
    2. Ignition Installation Guide
    3. Ignition Home Screen
    4. Ignition Cylinder Information
    5. New Ignition Cylinder Information

  6. Controls — Speed (Governor) →

    1. Governor Overview
    2. Governor Installation Guide
    3. Governor Home Screen
    4. Governor Sensor Status Screen
    5. Governor Setup

  7. Controls — Touchscreen →

    1. Panel Install Guides
    2. Dynamic Control Touchscreen Modbus
    3. Dynamic Control Touchscreen (DCT) Manual

  8. Controls — Translator (EDT) →

    1. EDT Overview
    2. EDT Installation
    3. EDT Setup and Operation
    4. EDT Additional RS-485 Slave Port

  9. Exhaust →

    1. Exhaust- Element Placement Order in EMIT housings
    2. Exhaust- Fundamentals of Acoustics
    3. Exhaust- Catwalk / Platform OSHA and IBC/ASCE Compliance Criteria
    4. Exhaust- PPM /Grams / BHP Conversion Estimate

  10. All articles →

    1. Exhaust- Element Placement Order in EMIT housings
    2. Software Update - Controls
    3. AFRC Overview
    4. Ignition Overview
    5. Governor Overview

Feedback and Knowledge Base

(thinking…)