Annunciator Setup- Input Voltage Alarm

An alarm can be defined to activate when the input voltage of the annunciator is above or below a certain value.

To configure, navigate to "Annunciator Setup", "Input Setup", followed by "Input Voltage". On this page the following options are defined for the input voltage alarm.

  • Alarm when below: Enter a minimum voltage for the alarm, or 0 for unused
  • Alarm when above: Enter a maximum voltage for the alarm, or 0 for unused
  • Duration: Enter the alarm duration before activating
  • Alarm Class / Action: Enter the alarm class and action as defined previously

Feedback and Knowledge Base